CO2 Cabinet
- Axis moving in only one direction
- Axis moving to the opposite when controlled from the panel
- Problems with panel direction keys (origin normal)
- Reverse movement when axis resetting
- Unusual axis noise when reaching the origin
- Unusual axis noise upon starting to move
- Both axes not responding
- One of the Axes not responding
- Abnormal X/Y axis movement upon powering on
- Abnormal axis movement
- Failure to hold the workpiece in place (Rotary attachment)
- Patterns stretched or compressed
- Jittery rotary axis
- Wrong Rotation
- Rotary axis issues
- Mainboard causing the switch power voltage to drop
- Mainboard lighting up only when the computer connected
- Failure to read USB flash drive files
- Mainboard air assist port not working
- Mainboard indicator glowing red
- Mainboard unresponsive
- Mainboard failures
- Occasional stop of the X/Y axis during operation
- Failure to cut a certain material of a certain thickness
- Parts of the pattern burnt (especially the corners)
- Inconsistent cutting depth
- Cut lines not aligned with the engraved pattern
- Start and end lines of the pattern not aligned
- Line distortion when cutting
- Low-resolution and sparse lines