Warning!

Disconnect the engraver from power before lubricating the rail.

Lubrication Schedule: Every two weeks

Tools Needed:

• Cotton cloth
• White lithium grease

Step 1: Disconnect the engraver from power.

Step 2: Gently move the laser head out of the way to the far right or left.

Step 3: Wipe away dust and debris along the X and Y axis rails with a dry cotton cloth until they are shiny and clean. 

Step 4: Lubricate both the rails and screws with white lithium grease.

Step 5: Gently move the laser head and X-axis to coat the lubricant evenly along both rails.