Warning!

Disconnect the engraver from power before cleaning.

Cleaning Frequency: Daily, after each use

Caution!

• What you are engraving will determine the frequency at which you must clean your laser engraving machine. However, we suggest cleaning your device after each use for the best results.
• Mirrors 1, 2, and 3 are permanently aligned within a protective housing and should not require adjustment or cleaning. The focus lens is held within the laser head’s protective shell.
• Remember to let the cleaning fluid dry before further use.

Tools Needed:

• Lens brush
• Laser-safe microfiber cloth/cotton swab
• Alcohol/laser-safe cleaning solution
• Sterile single-use rubber gloves

To clean the windows of Mirrors 1, 2, and 3:

Step 1: Remove the dust and debris using the lens brush.

Step 2: Remove the dust and debris using the lens brush.

Step 3: Wipe the lens clean with the cloth/swab using gentle, circular motions.

To clean the focus lens:

Step 1: Gently remove the lens from the laser head.

Step 2: Remove the dust or debris using the lens brush.  

Step 3: Dip the cloth or cotton swab in the solution and squeeze out the excess fluid.

Step 4: Wipe the lens clean with the cloth/swab using gentle, circular motions.

Step 5: Replace the lens, ensuring the concave side is facing down.