Warning!

• Disconnect the engraver from power before cleaning.
• Allow the cleaning fluid to dry completely before reusing.

Cleaning Frequency: Weekly*

*The cleaning frequency will vary depending on the rate of dust accumulation on the exhaust fan and pipe. This is determined by the materials processed and the air quality of the working environment.

Tools Needed:

• Dust brush
• Vacuum
• Water

To clean the fan and pipe:

Step 1: Cut the power to the engraver.

Step 2: Remove the exhaust pipe.

Step 3: Brush off the dust accumulating on the fan blades using a soft dust brush.

Step 4: Vacuum away the dust.

Step 5: Clean the pipe using tap water and let it dry completely before reconnecting to the engraver.