Warning!

Disconnect from power before cleaning.

Caution!

• The surface of the lens is prone to scratches. Avoid direct pressure or contact, which can cause scratches by grinding debris into the lenses.
• Remember to let the cleaning fluid dry before using the machine.

Cleaning Frequency: Daily, after each use

Tools Needed:

• Lens brush
• Laser-safe microfiber cloth/cotton swab
• Alcohol/laser-safe cleaning solution
• Sterile, single-use rubber gloves

Step 1: Loosen the restraining bolt fastening the laser module using the provided hex wrench.

Step 2: Brush away any large debris from the surface of the lens.

Step 3: Dip the cloth or cotton swab in the solution and squeeze out the excess fluid.

Step 4:Wipe the lens clean with the cloth/swab using gentle, circular motions.

Step 5: Replace the laser module and retighten the restraining bolt.

Step 6: Wait for the cleaning fluid to completely dry before further use.